|
Kaase Billet BBF Timing Pointer.
Adjustable, Billet timing pointer for all 385 series balancers, complete with mounting hardware. $78.00
Boss Nine Stack Injection.
Kaase has succeeded in investing this new stack
injected Boss Nine engine with exceptional torque and tractability-
qualities not usually associated with stack injection. But the hidden
plenum on the underside of the Boss Nine intake manifold equalizes the
pressures in all induction tracts and provides the engine with a clean,
consistent idle, excellent part-throttle performance, and instantaneous
throttle response. The plenum also provides for brake vacuum and
empowers the MAP sensor, which has a major influence in the metering of
the fuel.
Compared with a carbureted Boss Nine equivalent, the new stack injection system gives a surprisingly good account of itself. On
a typical 520cu in engine with 9.8:1 compression ratio, hydraulic
tappets, and running on pump fuel, the stack injection engine outpaced
its carbureted rival by an extra 30ft lb torque.
Kaase Logo Black T-Shirts
Kaase Logo Black T-shirts 100% cotton, available in XXXL, XXL, XL , large and med. $14.00, XXL, XXXL $15.00
Boss Nine Sheet Metal Valve Covers.
JKRE Billet Rail Boss Nine valve covers fit Kaase Boss Nine cylinder heads, OEM Boss cylinder heads and early A441 heads $675.00 set.
LSM SC-2000 Spring Changing Tool.
The frame and arms of the SC-2000 are machined out of billet aluminum. The jaw capacity is 8 3/8 with a throat depth of 5 1/2 which is enough for even the hard to fit big chief and hemi heads. Acme lead screws are used on both the valve and spring sides to allow for compression from either end and precise positioning of the tool for optimum access. It easily compresses springs to 1000 lbs. $339.00
JKRE Stainless Steel valves for your CJ,SCJ, and P-51 Cylinder Heads.
JKRE Stainless valves will fit your original cast iron or aluminum CJ, SCJ, P-51 and 460 heads and give you another .100 installed height.
Intake valves measure 2.250 head dia., 11/32 stem, .250 tip and overall length is 5.365.
Exhaust valves measure 1.760 head dia., 11/32 stem, .250 tip, overall length is 5.150.
-$240.00 set
Original Style Boss 429 Valve Cover Ignition wire Looms!
These Ignition wire clips have been reproduced to exact original specs, except they will except 8mm aftermarket wires.
-$50.00
Intake and Carb Package! 
Quick Fuel Technologies gasoline 1050 or 1150 Dominator carb, Ford Motorsport 4500 series Victor Intake and Felpro intake gasket set.
Save $ buying as a combo $1499.00
Jon Kaase Racing Engines Logo ignition wire sets by Moroso 
Moroso wire technologies Ignition wire sets with the Jon Kaase Racing Engines Logo.Available in 90 135 and straight boots.
- Light Ford blue, Dark Ford Blue and Black $89.00
- Boss 429 sets $125.00
Danny Bee Bronze Camshaft Thrustplate for Big Block Ford 
No Machining Required!
Bolt on the all Bronze Danny Bee BBF cam thrust plate for your 385 series roller cam engine without the hassle of timely machine work.
- Stock thickness
- Includes mounting hardware
- $58.00
Hard to Find Build Up Parts!
- Front Covers for 429-460 385 series engines,includes fuel pump block off. $95.00
- Ford Distributor Hold Down $10.50
- Cylinder Head Dowels , sold in packs of 4 $6.00
- Kaase Extra Thick Steel Cam Washer $5.00
- Billet Steel Harmonic Balancer Spacer $45.00
- Crankshaft Keys $5.00
- Brass Freeze Plug Kits $32.00
|
