The Engine Masters Competition has been the perfect platform for the
development of quality Street & Strip combinations and parts for
the serious engine builder and or street car enthusiast.
Working closely with some of the worlds finest engine builders has
enabled us to design and manufacture manifolds that have the best
horsepower and torque curves on the market today.
This has been achieved through countless hours of testing and modifying
a variety of different manifolds, which has helped us come up with a
formula for optimising cross sectional area - velocity, and fuel
to the effectiveness of our manifolds is Jon Kaase's win at the 2004
Engine Masters Competition. After testing many manifolds Jon used our
4500 218cc manifold to produce the astounding numbers of 620ft/lb and
700hp from his pump gas 410cube Cleveland.
Even more impressive was the fact that the manifold was run as cast and with no internal hand grinding whatsoever!
are available to suit our 185cc and 218cc Cleveland cylinder heads on
9.2"deck Cleveland blocks, 9.5" Deck 351 Windsor blocks ( 9.5" deck
Windsor conversions, will require the use of our CHI water crossover -
bypass housing) and we also have a 8.2" deck 302 Windsor manifold to
suit our 185cc cylinder heads on 302 Windsor blocks.
A new addition to the 3V range will be our new dual plane manifold to suit the 3V 225cc cylinder heads.
This manifold has the external appearance of a factory cast iron dual
plane manifold, with a totally redesigned runner system. In an
independent test it produced no less than 70ft/lb more torque than an
Edelbrock Performer at 2250 rpm !!!
We also have on the way (available Dec 2005) our new 351W manifold to
suit Windsor style cylinder heads on a 9.5"deck Windsor block. This
manifold will be available to suit both 4500 Dominator and 4150 Holley
All our inlet manifolds are made from the same A356 aluminium as our
cylinder heads, but unlike other manufacturers, our manifolds are heat
treated to T-6 for unsurpassed durability.
Pricing: 9.200 deck Cleveland 4150 flange $490.00
9.200 deck Cleveland 4500 flange $550.00
9.200 deck Windsor 4150 flange $490.00
9.200 deck Windsor 4500 flange $550.00
9.500 deck Windsor 4150 flange $490.00
9.500 deck Windsor 4500 flange $550.00
Dual Plane intake for Cleveland (4150 only) $550.00
8.200 deck for 302 block (4150 only) for use on 3v 185 heads $550.00